Latest Activity on Raymarine Technical Forum

Andrew Dickson posted a discussion

Navionics Gold not displaying on C80

I inserted the Navionics CF card into my Raymarine C80 this year and the detail does not load. I tried the card for the Florida area that came with the boat and that detail did not come up either. Both of these worked last summer.In reading a number of articles today, it may be possible that I need to update software but I find that odd as everything worked beautifully last year.Where do I go from here? Thanks for your assistance.Andrew DicksonSee More

Lothar Taylor replied to Stephen Freitas's discussion Seatalk2 to NMEA2000

Lothar Taylor posted a discussion

RS-130 Interface to a Hybrid Network with Seatalk NG and Seatalk HS

Hi,I have a networked set of E-120 and E-80 classic displays (networked via Seatalk HS) and then a partial NG network with an EVO-400 pilot and a couple of P70R's and an i-70 instrument. The NG network data communicates with the HS side via an NMEA 2000 adapter cable running from an NG spur port to the E-120 master.GPS for the system is currently provided by a NMEA 0183 sensor connected to one of the slave MFDs, an E-80 on the flybridge.I'm thinking about changing the GPS sensor to a RS-130 because I'd like to not have my entire system depending on GPS coming through a slave MFD.So, could I interface the RS-130 into the NG network at the flybridge (where one end of the NG bus terminates right now) and then expect GPS position data will find its way to the MFDs via the NMEA2000 interface into the master MFD and then back to the other MFDs via the Seatalk HS network?If that data connectivity is feasible, then my proposed solution is to remove the terminator currently at the flybridge, extend the NG backbone cable to where the RS-130 would mount (radar arch above the flybridge), use a terminating adapter (A06074) and then a short spur cable to connect to and power the RS-130. LEN load balance will still be reasonable for the NG bus, 7 loads on one side of the power feed point and 5 loads on the other.Comments?See More

Ronald Rycraft posted a discussion

RAY 54 Replacement microphone cord.

I am trying to locate a part number for a replacement microphone cord for my Ray54 VHF. The cord is weathered and deteriorated. See More

Mike Grausam replied to Mike Grausam's discussion e125 GPS Antenae/Heading Compass

paul replied to paul's discussion Multiple data sources Seatalk NG

Peter Small updated their profile

Andrew Dickson replied to Andrew Dickson's discussion Display deterioration on C80

Andrew Dickson posted a discussion

Navionics Gold not displaying on C80

Lothar Taylor replied to Stephen Freitas's discussion Seatalk2 to NMEA2000

Lothar Taylor posted a discussion

RS-130 Interface to a Hybrid Network with Seatalk NG and Seatalk HS

Ronald Rycraft posted a discussion

RAY 54 Replacement microphone cord.

Mike Grausam replied to Mike Grausam's discussion e125 GPS Antenae/Heading Compass

paul replied to paul's discussion Multiple data sources Seatalk NG

Peter Small updated their profile

Denis posted a photo

photo_1

Russell H Norman left a comment for Dan Maida

Michael Mahler posted discussions

SPX10 Wandering Heading

Sharing NMEA data between MFD's

Michael Justinger posted a photo

Mike J

Doug Brown replied to Doug Brown's discussion Dim E80 Display

Moderator - Raymarine, US replied to Harry's discussion E120 data card

Mick Laver replied to Mick Laver's discussion e97 10.3 UPgrade - can't goto or view waypoints

Peter Small replied to Daniele Romeo's discussion micronet T111 strange message tilt on screen

Moderator - Raymarine, US replied to David Wehr's discussion C80 Question/help

Bill Fernandez replied to Bill Fernandez's discussion C70 and RL70crc together

jeff young replied to jeff young's discussion networking help

paul replied to paul's discussion Multiple data sources Seatalk NG